Philosophiae Doctor - PhD (Post-School Studies)
Permanent URI for this collection
Browse
collection.page.browse.recent.head
Item (Re)configuring socially just pedagogies with posthumanism and decoloniality: Experimenting with processual learning in the Architectural Technology extended curriculum programme in the Western Cape, South Africa(University of the Western Cape, 2024) Noble, Alexandra Claire; Bozalek, VivienneThis doctoral thesis investigates the potential of processual learning within the Architectural Technology Extended Curriculum Programme in South Africa to foster transformative learning experiences and promote social justice. Currently, undergraduate AT qualifications in South Africa primarily emphasise technical and academic knowledge, while neglecting affective and socio-economic-environmental sensibilities in the learning process. As an alternative to this approach, the study explores the benefits of integrating processual learning interventions into the curriculum to enhance student learning opportunities. The research is framed within posthumanism and decoloniality, aiming to investigate how these theoretical underpinnings can contribute to socially just pedagogies in architectural education. The focus is on the Architectural Technology - Extended Curriculum Programme offered at a university of technology in the Western Cape. The programme is designed to provide access to historically marginalised students. The interventions introduced in the curriculum involve walking excursions and site visits that aim to develop students’ social, historical, environmental and political awareness in architectural studies. By exploring the spatial planning of Cape Town with its inherent power relations in South African society, the research seeks to alert students to social and spatial inequalities and encourage students to consider ways of envisaging a built environment that is more equitable and just.Item Exploring the design and implementation of an entrance readiness assessment and its relationship with performance outcomes among first year TVET college students(University of the Western Cape, 2024) De Wee, Marissa Francine; Papier, JoyTechnical and Vocational Education and Training (TVET) college entrance/placement tests have been critiqued in the few studies done in South Africa because they offer insufficient information about vocational students and their potential for success or failure. In light of the limitations associated with current entrance-testing mechanisms in South African TVET colleges and the limited information they afford colleges about entry-level students, this study set out to investigate alternative models or instruments that might yield a more holistic and informative picture, particularly with regard to students who might not complete their studies. The aims of this study were therefore to explore the development of a more appropriate entry-level readiness assessment for first-year TVET college students and to examine the possible relationships between their profiles at entry and their success/lack of success at the end of the first year. It was anticipated that the research findings could contribute to the sparse local knowledge base on these crucial issues in the South African TVET context. Using a pragmatic approach and mixed methods of data gathering within a convergent parallel design, a model that had been tested in international education systems was applied as a framework into which local input obtained from college experts was integrated to produce an entrance assessment instrument that was administered to first year college students. Qualitative and quantitative data were juxtaposed with first year performance outcomes, and statistical analyses conducted produced noteworthy associations among the findings. The research ultimately demonstrated that existing TVET college placement tests are severely limited in acknowledging the multifaceted nature of education and the diverse strengths and challenges that students bring to the learning journey. What was further revealed were the many taken-for-granted assumptions about TVET college students and their performance that require ongoing interrogation so that interventions remain at the cutting edge rather than relying on what may be outdated norms and stereotypes.Item Exploring competence development through the transfer of specialist knowledge and skills from engineering lecturers to students in South African Technical and Vocational Education and Training colleges: A COMET study(University of the Western Cape, 2024) Hurjunlal, Adhir; Papier, JoyThis study investigates the potential of the COMET (Competency Measurement in Electrotechnology) occupational competence diagnostic model to assist TVET (Technical and Vocational Education and Training) college lecturers in transferring skills, knowledge and competencies to their students by applying the dynamics of the model and through various pedagogical strategies. Achieving holistic problem-solving competence is a fundamental goal of the COMET framework and is embedded in eight competence criteria that focus on real-life, complex, work-related problems. A mixed method, explanatory sequential design comprising qualitative and quantitative research methods was adopted. Data were gathered from 275 students and 22 lecturers at five public TVET colleges. Two COMET large-scale open-ended learning tasks and a test task were conducted to measure the occupational competence of TVET students and lecturers. Lecturer data on competence scores, experiences of doing the task, and teaching and learning strategies were collected. Analysis of the data employed the SPSS version 26 and R Studio 4.0. This study demonstrated that lecturers were indeed able to transfer their skills and knowledge to students. Areas of learning in which transfer was strong and areas in which transfer could be enhanced were identified using the COMET diagnostic model. The evidence further indicated that a variety of pedagogic strategies – for instance, feedback, metacognition, cognitive apprenticeship, problem-based learning and work-integrated learning – are used to enhance transfer and are most effective when used interchangeably or integrated.Item Patched pathways, dead-end dreams: articulation and access to higher education for mature women in early childhood development(Universty of the Western Cape, 2024) Zokufa, Kaylianne AploonThe purpose of this study was to document the learning pathways and transitions of mature women Early Childhood Development (ECD) practitioners in the Western Cape from Technical and Vocational Education and Training (TVET) colleges into universities. There has, to date, been limited research regarding the lived experiences of predominantly Black and marginalised women in the field of ECD and their pathways into and through higher education. It is well known, however, that mature women face significant barriers to access to education, and that they have to maintain high levels of motivation and resilience to ensure educational success. In this detailed qualitative study, I employed three research methods to gather both qualitative and quantitative data about the trajectories of Black women who had completed ECD training at TVET colleges in South Africa, and who wished to transition to higher education in the sub-field of education. Using a narrative life history methodology, my project aimed to generate knowledge about how women ECD practitioners, after completion of the formal college ECD certificate, accessed (or not) the university BEd (Foundation Phase) degree qualification. Interview data revealed the factors that promoted and impeded these women’s access to university, as well as the many ways in which broader social and economic factors in post-apartheid South Africa impacted on their life chances and choices. A feminist lens was used to understand their convoluted pathways into higher education, and to describe the barriers that frustrated them. Data were presented in feminist narrative form to ensure that the voices of women participants were captured as authentically as possible. Appropriate theoretical perspectives applied in my study enabled consideration of the ways in which issues of race, class, and gender, and their intersections, shaped these mature women’s learning pathways and lived experiences.Item Critical posthumanism in geomatics education: A storytelling intervention(University of the Western Cape, 2018) Motala, Siddique; Bozalek, VivienneThis study is located in engineering education at a South African university of technology, and is theorised using relational ontologies such as critical posthumanism, feminist new materialism and non-representational theory. It explores the potential of a digital storytelling intervention in an undergraduate geomatics diploma programme. Geomatics qualifications in South Africa are critiqued for their embedded humanism and subtle anthropocentrism despite attempts at post-apartheid curricular reform. Additionally, these qualifications are focused on technical content, and heavily influenced by Western knowledges.Item Critical posthumanism in geomatics education: A storytelling intervention(University of the Western Cape, 2018) Motala, Siddique; Bozalek, VivienneThis study is located in engineering education at a South African university of technology, and is theorised using relational ontologies such as critical posthumanism, feminist new materialism and non-representational theory. It explores the potential of a digital storytelling intervention in an undergraduate geomatics diploma programme. Geomatics qualifications in South Africa are critiqued for their embedded humanism and subtle anthropocentrism despite attempts at post-apartheid curricular reform. Additionally, these qualifications are focused on technical content, and heavily influenced by Western knowledges.Item Critical posthumanism in geomatics education: A storytelling intervention(University of the Western Cape, 2018) Motala, Siddique; Bozalek, VivienneThis study is located in engineering education at a South African university of technology, and is theorised using relational ontologies such as critical posthumanism, feminist new materialism and non-representational theory. It explores the potential of a digital storytelling intervention in an undergraduate geomatics diploma programme. Geomatics qualifications in South Africa are critiqued for their embedded humanism and subtle anthropocentrism despite attempts at post-apartheid curricular reform. Additionally, these qualifications are focused on technical content, and heavily influenced by Western knowledges.Item Workplace learning experiences of TVET college candidates in learnership programmes : an exploration of the workplace learning environment(University of the Western Cape, 2016) Vollenhoven, Gerald; Papier, JoySkills development policies in South Africa and further afield consider learning in and from the workplace as critical to the training of artisans at intermediate level. Since the inception of democracy, South Africa has become part of a globally competitive economic arena where highly skilled workers capable of engaging with new technology in a changing environment are increasingly required. Continuous innovation, it is held (Kraak, 1997), is dependent on the presence of two knowledge forms in society and work: an abundance of formal (scientific and technological) knowledge, and skilled worker 'know-how' or tacit knowledge. In the present system of technical and vocational education, theoretical learning and some practical skills are obtained in institutions, mostly in the recently renamed TVET colleges, while job specific training occurs through prescribed periods of work placement. In light of common assumptions about the value of workplace learning, this research was concerned with exploring whether, and how such learning is taking place. It sought to understand the methodologies, practices, and affordances available to learning in the workplace, from the perspective of candidate apprenticeship/learnership students. To this end this study employed a qualitative approach for investigating how candidates experienced and interacted with the 'real world environment' of the workplace. Semi-structured interviews were conducted with a purposively selected sample comprising candidates engaged in programmes that necessitated a workplace learning component, namely, the apprenticeship and learnership in fitting and turning, motor/diesel and the auto electrical trades. Data analysis was undertaken using both Atlas ti software and manual methods for coding and identification of themes. Lenses used to describe and explain learning in the workplace included the conceptual frameworks of Engestrom‘s (1987) Activity theory; Vygotsky‘s (1978) notion of learning via the 'expert other' within a Zone of Proximal Development; and Lave and Wenger‘s (1991) theorising of situated learning in Communities of Practice. This triangular juxtaposition of complementary theories formed a richly informative explanatory system for my further exploration. As a qualified artisan myself I was familiar with the negative connotations of a historical 'sit by Nellie' approach, a phrase used to caricature the way apprentices learned in the past, by simply being passive observers of the experts. However, my findings were to reveal a vastly different picture of learning in this modern, visual and tactile age. Learners in this study experienced a range of learning modalities, methodologies and affordances that were reported in 'thick' descriptions, building a vivid picture of engagement and interaction. In addition to the abundance of learning opportunities candidates experienced, their responses revealed the indisputably central role played by 'expert others' in moving them towards competence – the expert artisan emerging as the quintessential didactic practitioner. This thesis proceeds to highlight the experiences of candidates on their learning journey in the workplace, and suggests recommendations in respect of these. Key learnings are distilled, which ultimately point to the need for collective effort in appreciating and retaining for the benefit of future generations of artisans, the mentoring potential that exists in our expert artisans wherever they may be found.Item Workplace learning experiences of TVET college candidates in learnership programmes : an exploration of the workplace learning environment(University of the Western Cape, 2016) Vollenhoven, Gerald; Papier, JoySkills development policies in South Africa and further afield consider learning in and from the workplace as critical to the training of artisans at intermediate level. Since the inception of democracy, South Africa has become part of a globally competitive economic arena where highly skilled workers capable of engaging with new technology in a changing environment are increasingly required. Continuous innovation, it is held (Kraak, 1997), is dependent on the presence of two knowledge forms in society and work: an abundance of formal (scientific and technological) knowledge, and skilled worker 'know-how' or tacit knowledge. In the present system of technical and vocational education, theoretical learning and some practical skills are obtained in institutions, mostly in the recently renamed TVET colleges, while job specific training occurs through prescribed periods of work placement. In light of common assumptions about the value of workplace learning, this research was concerned with exploring whether, and how such learning is taking place. It sought to understand the methodologies, practices, and affordances available to learning in the workplace, from the perspective of candidate apprenticeship/learnership students. To this end this study employed a qualitative approach for investigating how candidates experienced and interacted with the 'real world environment' of the workplace. Semi-structured interviews were conducted with a purposively selected sample comprising candidates engaged in programmes that necessitated a workplace learning component, namely, the apprenticeship and learnership in fitting and turning, motor/diesel and the auto electrical trades. Data analysis was undertaken using both Atlas ti software and manual methods for coding and identification of themes. Lenses used to describe and explain learning in the workplace included the conceptual frameworks of Engestrom‘s (1987) Activity theory; Vygotsky‘s (1978) notion of learning via the 'expert other' within a Zone of Proximal Development; and Lave and Wenger‘s (1991) theorising of situated learning in Communities of Practice. This triangular juxtaposition of complementary theories formed a richly informative explanatory system for my further exploration. As a qualified artisan myself I was familiar with the negative connotations of a historical 'sit by Nellie' approach, a phrase used to caricature the way apprentices learned in the past, by simply being passive observers of the experts. However, my findings were to reveal a vastly different picture of learning in this modern, visual and tactile age. Learners in this study experienced a range of learning modalities, methodologies and affordances that were reported in 'thick' descriptions, building a vivid picture of engagement and interaction. In addition to the abundance of learning opportunities candidates experienced, their responses revealed the indisputably central role played by 'expert others' in moving them towards competence – the expert artisan emerging as the quintessential didactic practitioner. This thesis proceeds to highlight the experiences of candidates on their learning journey in the workplace, and suggests recommendations in respect of these. Key learnings are distilled, which ultimately point to the need for collective effort in appreciating and retaining for the benefit of future generations of artisans, the mentoring potential that exists in our expert artisans wherever they may be found.Item Workplace learning experiences of TVET college candidates in learnership programmes : an exploration of the workplace learning environment(University of the Western Cape, 2016) Vollenhoven, Gerald; Papier, JoySkills development policies in South Africa and further afield consider learning in and from the workplace as critical to the training of artisans at intermediate level. Since the inception of democracy, South Africa has become part of a globally competitive economic arena where highly skilled workers capable of engaging with new technology in a changing environment are increasingly required. Continuous innovation, it is held (Kraak, 1997), is dependent on the presence of two knowledge forms in society and work: an abundance of formal (scientific and technological) knowledge, and skilled worker 'know-how' or tacit knowledge. In the present system of technical and vocational education, theoretical learning and some practical skills are obtained in institutions, mostly in the recently renamed TVET colleges, while job specific training occurs through prescribed periods of work placement. In light of common assumptions about the value of workplace learning, this research was concerned with exploring whether, and how such learning is taking place. It sought to understand the methodologies, practices, and affordances available to learning in the workplace, from the perspective of candidate apprenticeship/learnership students. To this end this study employed a qualitative approach for investigating how candidates experienced and interacted with the 'real world environment' of the workplace. Semi-structured interviews were conducted with a purposively selected sample comprising candidates engaged in programmes that necessitated a workplace learning component, namely, the apprenticeship and learnership in fitting and turning, motor/diesel and the auto electrical trades. Data analysis was undertaken using both Atlas ti software and manual methods for coding and identification of themes. Lenses used to describe and explain learning in the workplace included the conceptual frameworks of Engestrom‘s (1987) Activity theory; Vygotsky‘s (1978) notion of learning via the 'expert other' within a Zone of Proximal Development; and Lave and Wenger‘s (1991) theorising of situated learning in Communities of Practice. This triangular juxtaposition of complementary theories formed a richly informative explanatory system for my further exploration. As a qualified artisan myself I was familiar with the negative connotations of a historical 'sit by Nellie' approach, a phrase used to caricature the way apprentices learned in the past, by simply being passive observers of the experts. However, my findings were to reveal a vastly different picture of learning in this modern, visual and tactile age. Learners in this study experienced a range of learning modalities, methodologies and affordances that were reported in 'thick' descriptions, building a vivid picture of engagement and interaction. In addition to the abundance of learning opportunities candidates experienced, their responses revealed the indisputably central role played by 'expert others' in moving them towards competence – the expert artisan emerging as the quintessential didactic practitioner. This thesis proceeds to highlight the experiences of candidates on their learning journey in the workplace, and suggests recommendations in respect of these. Key learnings are distilled, which ultimately point to the need for collective effort in appreciating and retaining for the benefit of future generations of artisans, the mentoring potential that exists in our expert artisans wherever they may be found.