Browsing by Author "Baker, Priscilla G."

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    Complexation-based detection of nickel(ii) at a graphene-chelate probe in the presence of cobalt and zinc by adsorptive stripping voltammetry
    (MDPI, 2017) Pokpas, Keagan; Jahed, Nazeem; Baker, Priscilla G.
    The adsorptive stripping voltammetric detection of nickel and cobalt in water samples at metal film electrodes has been extensively studied. In this work, a novel, environmentally friendly, metal-free electrochemical probe was constructed for the ultra-trace determination of Ni2+ in water samples by Adsorptive Cathodic Stripping Voltammetry (AdCSV). The electrochemical platform is based on the adsorptive accumulation of Ni2+ ions directly onto a glassy carbon electrode (GCE) modified with dimethylglyoxime (DMG) as chelating agent and a Nafion-graphene (NGr) nanocomposite to enhance electrode sensitivity. The nafion-graphene dimethylglyoxime modified glassy carbon electrode (NGr-DMG-GCE) shows superior detection capabilities as a result of the improved surface-area-to-volume ratio and enhanced electron transfer kinetics following the incorporation of single layer graphene, while limiting the toxic effects of the sensor by removal of the more common mercury, bismuth and lead films.
  • Thumbnail Image
    Item
    Graphenated polyaniline nanocomposite for the determination of polyaromatic hydrocarbons (pahs) in water
    (2013) Tovide, Oluwakemi Omotunde; Iwuoha, Emmanuel; Nazeem, Jahed; Baker, Priscilla G.
    The thesis presents a simple, sensitive, low cost and a novel graphenated polyaniline doped tungsten trioxide nanocomposite, as an electrochemical sensor for the detection and quantitative and determination of PAHs, which are ubiquitous, toxic, as well as dangerous organic pollutant compounds in the environment. The selected PAHs (anthracene, phenanthrene and pyrene) in wastewater were given priority as a result of their threat to human nature and that of the environment. In order for a healthy, non-polluted and well sustainable environment, there is need for an instrument that is capable of detecting and quantifying these organic pollutants onsite and also for constant monitoring. The nanocomposites were developed by chemical and electrochemical methods of preparations, exploiting the intrinsic properties of polyaniline, graphene and tungsten trioxide semiconducting materials. Chemically, graphene-polyaniline (GR-PANI) nanocomposite was synthesised by in situ polymerisation method, then casted on a surface of glassy carbon electrode to form GR-PANI modified electrode. The properties of the prepared electrode were investigated through morphological and spectroscopic techniques, which confirmed the formation of the composite. The electroactivity of the prepared modified electrode revealed great improvement in cyclic and square wave voltammetric response on anthracene. A dynamic range of 2.0 × 10-5 to 1.0 × 10-3 M and detection limit of 4.39 x 10-7 M was established.
  • Thumbnail Image
    Item
    Microwave-assisted synthesis of schiff base metal–ligand complexes with copper and nickel centres for electrochemical in vitro sensing of nitric oxide in an aqueous solution
    (MDPI, 2022) Moeketse, Teboho N.; Baker, Priscilla G.; Farao, Al. C.
    Nitric oxide (NO), the smallest signalling molecule known in the human body, keeps blood vessels dilated, controls blood pressure, and has numerous other health regulatory effects. The use of Schiff base complexes incorporated onto electrodes to make electrochemical sensors has been explored as an effective method for the determination and quantification of nitric oxide in aqueous solutions. Schiff base ligands were complexed with Cu and Ni metal centres using the microwave synthesis method to produce metal–ligand complexes with enhanced capabilites for NO detection. The electrical current generated at the anode is directly proportional to NO concentrations in the solution through its oxidation to HNO3 . Various characterisation techniques were implemented to verify the integrity of each step of metal–ligand synthesis as well as the final product produced, using FT-IR, UV-VIS, and TGA.
  • Thumbnail Image
    Item
    The use of cyclodextrin template-based metal oxide nanomaterials in the development of electrochemical sensors for phenolic endocrine disruptor compounds
    (University of the Western Cape, 2010) Masikini, Milua; Waryo, Tesfaye T.; Baker, Priscilla G.; Iwuoha, Emmanuel; Dept. of Chemistry; Faculty of Science
    Iron oxide nanoparticles were prepared using co-precipitation method in the presence and absence of beta-cyclodextrin β-CD). Such materials were characterized using transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), attenuated total reflection Fourier transform infrared (ATR-FTIR), X-ray diffraction (XRD), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA). The TEM shows that the surface morphology has no difference between nanoparticles prepared in the presence and absence of beta-cyclodextrin β-CD), amorphous particles with high surface area and dimensions of about 100 nm by 500 nm. The amorphous states of nanoparticles are confirmed further by XRD. The ATR-FTIR analysis confirms inclusion complex between β-CD and nanoparticles. The nanoparticles synthesized were used to develop an electrochemical sensor for phenolic endocrine disruptors by modifying the surface area of glassy carbon electrode (GCE). Electrochemical characterization of the iron oxide β-CD nano-composites, studied in 0.1 M potassium chloride (KCl) using chronoamperometry,showed that the surface concentration of the adsorbed composite material was 8.5 x 10-8 mol/cm2. Sensor analysis of bisphenol A (BPA) was carried out using cyclic voltammetry (CV) and square wave voltammetry (SWV) based on amperometric techniques which gave a linear range of 0.50 × 10-6 M to 50 × 10-6 M; limit of detection of 0.156 x 10-6 M and order of magnitude of linearity of 2.03. Hence, the sensor was further used to study 4-tert-octylphenol (TOP); the results showed that the sensitivity and the limit of detection were 11.31 nA L/mol and 0.249 x 10-6 M, respectively and order of magnitude of linearity of 2.00.