Browsing by Author "Pereao, O"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    Chitosan/PEO nanofibers electrospun on metallized track-etched membranes: fabrication and characterization
    (Elsevier, 2021) Pereao, O; Uche, C; Bublikov, P.S
    The development of next-generation adsorption, separation, and filtration materials is growing with an increased research focus on polymer composites. In this study, a novel blend of chitosan (CS) and polyethylene oxide (PEO) nanofiber mats was electrospun on titanium (Ti)-coated polyethylene terephthalate (PET) track-etched membranes (TMs) with after-treatment by glutaraldehyde in the vapor phase for enhancing the nanofiber stability by crosslinking. The prepared composite, titanium-coated track-etched nanofiber membrane (TTM-CPnf) was characterized by Fourier transform infra-red (FTIR), water contact angle, and scanning electron microscopy (SEM) analyses. Smooth and uniform CS nanofibers with an average fiber diameter of 156.55 nm were produced from a 70/30 CS/PEO blend solution prepared from 92 wt. % acetic acid and electrospun at 15 cm needle to collector distance with 0.5 mL/h flow rate and an applied voltage of 30 kV on the TTM-CPnf. Short (15 min) and long (72 h)-term solubility tests showed that after 3 h, crosslinked nanofibers were stable in acidic (pH = 3), basic (pH = 13), and neutral (pH = 7) solutions. The crosslinked TTM-CPnf material was biocompatible based on the low mortality of freshwater crustaceans Daphnia magna. The composite membranes comprised of electrospun nanofiber and TMs proved to be biocompatible and may thus be suitable for diverse applications such as dual adsorption–filtration systems in water treatment.
  • Thumbnail Image
    Item
    Photocatalytic and antifouling properties of electrospun TiO2 polyacrylonitrile composite nanofibers under visible light
    (Elsevier, 2021) Ademola Bode-Aluko, C; Pereao, O; Kyaw, H.H
    Polyacrylonitrile and its TiO2 composites were electrospun into nanofibers in N, N’-dimethylformamide for photocatalysis and antifouling experiments. The resultants nanofibers were characterized using field emission scanning microscope, Fourier transform infrared spectroscopy, x-ray diffraction, x-ray photoelectron spectroscopy and contact angle analyses. Fourier transform infrared spectroscopy confirmed the formation of polyacrylonitrile-TiO2 composite nanofibers with their diameter ranging from 10 to 340 nm. The x-ray photoelectron spectroscopy results indicate the formation of O–Ti–C bonds on polyacrylonitrile-TiO2 matrix. polyacrylonitrile-TiO2 and polyacrylonitrile nanofiber surfaces showed superhydrophobicity with water contact angle of 155 ± 1 and 154 ± 1, respectively at 120 s. The photocatalytic properties of polyacrylonitrile nanofibers and polyacrylonitrile-TiO2 nanofibers were investigated under a simulated visible light source of 1000 W/m2 using methylene blue. About 90% of methylene blue was degraded within 3 h of exposure using polyacrylonitrile-TiO2 nanofibers while 55% methylene blue degradation was achieved for polyacrylonitrile nanofibers.
  • Thumbnail Image
    Item
    Photocatalytic and antifouling properties of electrospun TiO2 polyacrylonitrile composite nanofibers under visible light
    (Elsevier, 2021) Ademola Bode-Aluko, C; Pereao, O; Kyaw, H.H
    Polyacrylonitrile and its TiO2 composites were electrospun into nanofibers in N, N’-dimethylformamide for photocatalysis and antifouling experiments. The resultants nanofibers were characterized using field emission scanning microscope, Fourier transform infrared spectroscopy, x-ray diffraction, x-ray photoelectron spectroscopy and contact angle analyses. Fourier transform infrared spectroscopy confirmed the formation of polyacrylonitrile-TiO2 composite nanofibers with their diameter ranging from 10 to 340 nm. The x-ray photoelectron spectroscopy results indicate the formation of O–Ti–C bonds on polyacrylonitrile-TiO2 matrix. polyacrylonitrile-TiO2 and polyacrylonitrile nanofiber surfaces showed superhydrophobicity with water contact angle of 155 ± 1 and 154 ± 1, respectively at 120 s. The photocatalytic properties of polyacrylonitrile nanofibers and polyacrylonitrile-TiO2 nanofibers were investigated under a simulated visible light source of 1000 W/m2 using methylene blue. About 90% of methylene blue was degraded within 3 h of exposure using polyacrylonitrile-TiO2 nanofibers while 55% methylene blue degradation was achieved for polyacrylonitrile nanofibers.