Browsing by Author "Orce, J.N."

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    Developing a sorting code for Coulomb excitation data analysis
    (University of the Western Cape, 2015) Mehl, Craig; Orce, J.N.; Jones, P. M.; Triambak, S.
    This thesis aims at developing a sorting code for Coulomb excitation studies at iThemba LABS. In Coulomb excitation reactions, the inelastic scattering of the projectile transfers energy to the partner nucleus (and vice-versa) through a time-dependent electromagnetic field. At energies well below the Coulomb barrier, the particles interact solely through the well known electromagnetic interaction, thereby excluding nuclear excitations from the process . The data can therefore be analyzed using a semiclassical approximation. The sorting code was used to process and analyze data acquired from the Coulomb excitation of 20Ne beams at 73 and 96 MeV, onto a 194Pt target. The detection of gamma rays was done using the AFRODITE HPGe clover detector array, which consists of nine clover detectors, in coincidence with the 20Ne particles detected with an S3 double-sided silicon detector. The new sorting code includes Doppler-correction effects, charge-sharing, energy and time conditions, kinematics and stopping powers, among others, and can be used for any particle-γ coincidence measurements at iThemba LABS. Results from other Coulomb excitation measurements at iThemba LABS will also be presented.
  • Thumbnail Image
    Item
    Inelastic scattering of 9Li and excitation mechanism of its first excited state
    (Elsevier, 2013) Al Falou, H.; Kanungo, R.; Orce, J.N.
    The first measurement of inelastic scattering of 9Li from deuterons at the ISAC facility is reported. The measured angular distribution for the first excited state confirms the nature of excitation to be an E2 transition. The quadrupole deformation parameter is extracted from an analysis of the angular distribution.
  • Thumbnail Image
    Item
    Simulation of silicon and diamond detector systems by GEANT4 simulation techniques
    (University of the Western Cape, 2014) Erasmus, Nicholas Rattray; Orce, J.N.; Halindintwali, S
    There is a constant need for improvement in nuclear particle detection methods. Silicon surface barrier detectors have proved very valuable during the last decades. Diamond is a viable alternative to silicon as a semiconductor detector. It offers significant advantages over silicon due to its high radiation hardness and low drift currents. A Coulomb-excitation study has been carried out at TRIUMF using a 59.7 MeV 12C beam impinging on a 194Pt target. The particles underwent elastic Rutherford scattering in the target, and a double sided silicon S3 CD detector was used to measure the resulting particle energy spectra. These spectra were simulated in GEANT4 and compared to the experimental results. Subsequently, the silicon was replaced with diamond and the simulation was repeated. Such simulations of particle energy spectra, properly incorporating elastic Rutherford scattering, have not been carried out with GEANT4 before. An accurate simulation of the elastic peak obtained from particle spectra will provide a methodology for applying particle-gamma coincidence techniques. The study of the inelastic peak in 12C and similar nuclei will benefit from such developments. Such simulations will also offer high energy calibration points for the experimental data, and the possibility of testing the experimental conditions including the target thickness, beam energy, and linearity of electronic modules (e.g. the preamplifier). The simulation offered results comparable to the experimental case. GEANT4 was found to simulate the Rutherford cross sections at specific scattering angles as well as the position of the simulated energy peaks accurately when compared with the experimental case. As expected, the experimentally obtained particle energy spectra displayed more broadening than the simulated spectra, though the shape of the peaks was very similar. The simulation of the double sided diamond detector was a tentative first step in its testing as a particle detector. The sophisticated methods required to properly simulate and test diamond for nuclear physics experiments were not implemented. This simulation may serve as a starting point for further testing of diamond detectors, using advanced simulation techniques
  • Thumbnail Image
    Item
    Simulation of silicon and diamond detector systems by GEANT4 simulation techniques
    (University of the Western Cape, 2014) Erasmus, Nicholas Rattray; Orce, J.N.; Halindintwali, S
    There is a constant need for improvement in nuclear particle detection methods. Silicon surface barrier detectors have proved very valuable during the last decades. Diamond is a viable alternative to silicon as a semiconductor detector. It offers significant advantages over silicon due to its high radiation hardness and low drift currents. A Coulomb-excitation study has been carried out at TRIUMF using a 59.7 MeV 12C beam impinging on a 194Pt target. The particles underwent elastic Rutherford scattering in the target, and a double sided silicon S3 CD detector was used to measure the resulting particle energy spectra. These spectra were simulated in GEANT4 and compared to the experimental results. Subsequently, the silicon was replaced with diamond and the simulation was repeated. Such simulations of particle energy spectra, properly incorporating elastic Rutherford scattering, have not been carried out with GEANT4 before. An accurate simulation of the elastic peak obtained from particle spectra will provide a methodology for applying particle-gamma coincidence techniques. The study of the inelastic peak in 12C and similar nuclei will benefit from such developments. Such simulations will also offer high energy calibration points for the experimental data, and the possibility of testing the experimental conditions including the target thickness, beam energy, and linearity of electronic modules (e.g. the preamplifier). The simulation offered results comparable to the experimental case. GEANT4 was found to simulate the Rutherford cross sections at specific scattering angles as well as the position of the simulated energy peaks accurately when compared with the experimental case. As expected, the experimentally obtained particle energy spectra displayed more broadening than the simulated spectra, though the shape of the peaks was very similar. The simulation of the double sided diamond detector was a tentative first step in its testing as a particle detector. The sophisticated methods required to properly simulate and test diamond for nuclear physics experiments were not implemented. This simulation may serve as a starting point for further testing of diamond detectors, using advanced simulation techniques