Browsing by Author "Musyoka, Nicholas"

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    Cation-exchanged zeolites-A prepared from South African fly ash feedstock for CO2 adsorption
    (University of the Western Cape, 2015) Muvumbu, Jean-Luc Mukaba; Petrik, Leslie F.; Musyoka, Nicholas
    In South Africa coal combustion constitutes up to 90 % of the country’s energy need. This coal combustion activity is known to contribute to the amount of about 40 % of the total CO2 atmospheric emissions worldwide that are responsible for global warming effects. In addition burning of coal generates a large quantity of fly ash which creates environmental pollution since only a small portion of it is currently used in some applications. In order, on one hand to mitigate and sequester CO2 and on the other hand to reprocess fly ash and reuse it, this study focuses on developing new technologies with cost-effective and less energy consumption in the domain of CO2 capture and sequestration. CO2 has priority attention for being the largest contributor to global warming. Various techniques have been used for CO2 capture and sequestration, such as aqueous alkylamine absorption or adsorption onto a solid adsorbent such as zeolites. In this study NaA zeolite adsorbent was hydrothermally synthesised from South African fly ash. This fly ash based NaA zeolite was then used as starting material to prepare LiA, CaA, and MgA zeolite catalysts via ion-exchange for comparative CO2 adsorption capacity. A systematic design of the ion-exchange procedure was undertaken at either 30 °C or 60 °C for a contact time of 1 hr, 4 hrs, and 8 hrs with 1, 2 and 3 consecutive exchanges in each case in order to determine the optimum conditions for loading each cation exchanged. The adsorption of CO2 on the ion- exchanged fly ash based zeolite-A catalysts was carried out at 40 °C similar to the temperature of flue gas since the catalysts obtained in this study were also prepared with a view to their applications in flue gas system. The CO2 desorption temperature ranged between 40-700 °C. All materials used in this study, starting from fly ash feedstock, werecharacterized using various techniques to monitor the mineral and structural composition, the morphology, surface area and elemental composition and the adsorption capacity. The techniques included mainly Fourier transform infra-red, X-ray diffraction, Scanning electron microscopy, Transmission electron microscopy, Energy dispersive spectroscopy, X-ray fluorescence, Temperature programmed desorption.The results obtained from both Fourier transform infra-red and the X-raydiffraction spectroscopy for samples exchanged at either 30° C or 60 °C showedlower crystallinity in CaA and MgA zeolite samples. This decrease in crystallinitymainly affected the D4R (0-20° 2) and was demonstrated in the study to beinversely proportional to the increase of the atomic radius of cations (Li+ > Mg2+ >Ca2+). In the Fourier transform infra-red, the vibration band at 677 cm-1 attributedto the extra-framework cation, also proportionally increased with the decrease ofthe atomic radius or size of the cations, and was intense in LiA zeolite samples.
  • Thumbnail Image
    Item
    In-situ ultrasonic monitoring of zeolite A crystallization from coal fly ash
    (Elsevier, 2012) Musyoka, Nicholas; Petrik, Leslie; Hums, Eric; Baser, Hasan; Schwieger, Wilhelm
    In this study, high phase purity of zeolite A was prepared from coal fly ash precursors. The molar regime of both the clear solution extract and unseparated fly ash slurry was adjusted to achieve the right composition for zeolite A crystallization. The formation process for zeolite A from coal fly ash precursors was monitored in detail using an in situ ultrasonic system and was complemented by use of ex situ techniques such as XRD, FTIR, SEM and FTIR. The findings from both the in situ ultrasonic monitoring process and ex situ techniques clearly contributed significantly in unmasking the formation process of zeolite A from coal fly ash compared to previous studies reported in the literature. The study also enriches the existing body of literature by deeply investigating the gel–solution–crystal interactions starting from this complex feedstock. Comparable ultrasonic signals were generated when both clear and unseparated fly ash based precursor solutions were used during the zeolite synthesis process.
  • Thumbnail Image
    Item
    Novel zeolite Na-X synthesized from fly ash as a heterogeneous catalyst in biodiesel production
    (Elsevier, 2012) Babajide, Omotola; Petrik, Leslie; Musyoka, Nicholas; Ameer, Farouk
    Several studies have been carried out on the production of biodiesel using different heterogeneous catalysts but this study has been able to demonstrate the prospect of utilizing South African class F fly ash as a raw material for zeolite synthesis subsequently applied as a solid base catalyst in the production of biodiesel. A novel faujasite zeolite material synthesized from South African class F fly ash and denoted as FA/Na-X was ion exchanged with potassium to obtain the South African class F fly ash based zeolite FA/K-X. This heterogeneous catalyst was used in the conversion of sunflower oil with methanol to yield fatty acid methyl esters. Different characterization techniques were employed to give more information about this zeolite material. The FA/Na-X and the ion exchanged FA/K-X were applied as catalysts in biodiesel synthesis via transesterification reactions. A high quality biodiesel with a yield of 83.53% was obtained at reaction conditions of methanol:oil ratio of 6:1, catalyst amount of 3% (w/w) of oil and reaction temperature of 65 ◦C after 8 h.
  • Thumbnail Image
    Item
    Use of coal fly ash as a catalyst in the production of biodiesel
    (Slovnaft VÚRUP, 2010) Babajide, Omotola; Petrik, Leslie; Musyoka, Nicholas; Amigun, Bamikole; Ameer, Farouk
    South Africa is largely dependent on the combustion of coal for electricity production; Eskom’s coalfired power stations consume approximately 109 million tons of coal per annum, producing around 25 million tons of ash, to supply the bulk (93%) of South Africa’s electricity. The management of this fly ash has been a concern with various approaches for its beneficial use being investigated. This work presents the results of transesterification reaction using sunflower oil as feedstock with methanol and class F fly ash catalyst derived from a coal fly ash dump in South Africa to produce methyl esters (biodiesel). The fly ash based catalyst was prepared using the wet impregnation procedure with different loadings of potassium. This was characterized by powder X-ray diffraction (XRD), FTIR spectroscopy. The XRD patterns obtained indicated that the structure of the support gradually deformed with an increase in the loading and the extent of decomposition of KNO3 varied with the amount of loading. The influence of various reactions parameters such as loading amount of active components, methanol: oil ratio, reaction time, temperature and catalyst deactivation was investigated. The fly ash based catalyst loaded with 5% wt KNO3 at a reaction temperature of 160ºC exhibited maximum oil conversion (86.13%). The biodiesel synthesized was tested and important fuel properties of the methyl esters (Biodiesel) compared well with ASTM biodiesel standard