UWCScholar :: Browsing by Author "Ngqoloda, Siphelo"

Browsing by Author "Ngqoloda, Siphelo"

Now showing 1 - 9 of 9

Chemical Vapor Deposited Mixed Metal Halide Perovskite Thin Films
(Materials, 2021) Magubane, Siphesihle; Arendse, Christopher; Ngqoloda, Siphelo
In this article, we used a two-step chemical vapor deposition (CVD) method to synthesize methylammonium lead-tin triiodide perovskite films, MAPb1−xSnxI3, with x varying from 0 to 1. We successfully controlled the concentration of Sn in the perovskite films and used Rutherford backscattering spectroscopy (RBS) to quantify the composition of the precursor films for conversion into perovskite films. According to the RBS results, increasing the SnCl2 source amount in the reaction chamber translate into an increase in Sn concentration in the films. The crystal structure and the optical properties of perovskite films were examined by X-ray diffraction (XRD) and UV-Vis spectrometry. All the perovskite films depicted similar XRD patterns corresponding to a tetragonal structure with I4cm space group despite the precursor films having different crystal structures. The increasing concentration of Sn in the perovskite films linearly decreased the unit volume from about 988.4 Å3 for MAPbI3 to about 983.3 Å3 for MAPb0 .39Sn0 .61I3, which consequently influenced the optical properties of the films manifested by the decrease in energy bandgap (Eg) and an increase in the disorder in the band gap. The SEM micrographs depicted improvements in the grain size (0.3–1 μm) and surface coverage of the perovskite films compared with the precursor films.
Controlled deposition of lead iodide and lead chloride thin films by low-pressure chemical vapor deposition
(MDPI, 2020) Ngqoloda, Siphelo; Arendse, Christopher J.; Muller, Theo F.G.
Lead halide thin films, such as lead iodide (PbI2) and lead chloride (PbCl2), are used as precursor films for perovskite preparation, which is frequently achieved by vacuum thermal evaporation but rarely by the low-pressure chemical vapor deposition (CVD) method. Here, we report on the deposition of PbI2 and PbCl2 thin films on glass substrates by employing the low-pressure CVD method. The effect of the substrate temperature on the structure and morphology of the lead halide films is investigated. Crystalline films were realized for both lead halides, with PbI2 films showing high texture compared to the reduced texture of the PbCl2 films. Large lateral grain sizes were observed for the PbI2 films with a flat platelet grain morphology and an average grain size up to 734.2 ± 144.8 nm. PbCl2 films have columnar grains with an average grain size up to 386.7 ± 119.5 nm. The PbI2 films showed a band gap of about 2.4 eV, confirming its semiconducting properties, and the PbCl2 had a wide band gap of 4.3 eV, which shows the insulating properties of this material.
Effects of alkali and transition metal-doped TiO2 hole blocking layers on the perovskite solar cells obtained by a two-step sequential deposition method in air and under vacuum
(Royal Society of Chemistry, 2020) Ngqoloda, Siphelo; Nwankwo, U.; Nkele, Agnes Chinecherem
Planar perovskite solar cells (PPSCs) have received great attention in recent years due to their intriguing properties, which make them a good choice for photovoltaic applications. In this work, the effect of alkali and transition metal-doped TiO2 (cesium-doped TiO2 (Cs-TiO2) and yttrium-doped TiO2 (Y-TiO2)) compact layers on the optical, structural and the photovoltaic performance of the PPSCs have been investigated. The perovskite layer syntheses were carried out by depositing a lead iodide (PbI2) layer via spin-coating; converting PbI2 into methyl ammonium iodide (CH3NH3PbI3) by chemical vapor deposition (CVD) and spin-coating at 60 min and 60 s conversion times respectively.
Hybrid lead halide perovskite thin films and solar cells by chemical vapour deposition
(University of the Western Cape, 2021) Ngqoloda, Siphelo; Arendse, C.J
The organic-inorganic hybrid perovskites such as methyl ammonium lead iodide (MAPbI3) or mixed halide MAPbI3-xClx (x is usually very small) have emerged as an interesting class of semiconductor materials for their application in photovoltaic (PV) and other semiconducting devices. A fast rise in PCE of this material observed in just under a decade from 3.8% in 2009 to over 25.2% recently is highly unique compared to other established PV technologies such as c-Si, GaAs, and CdTe. The high efficiency of perovskites solar cells has been attributed to its excellent optical and electronic properties. Perovskites thin film solar cells are usually deposited via spin coating, vacuum thermal evaporation, and chemical vapour deposition (CVD).
Influence of synthesis method on structural
(Springer, 2023) Noukelag, Sandrine Kamdoum; Noukelag, Sandrine Kamdoum; Ngqoloda, Siphelo; Kotsedi, Lebogang
This contribution reports on the development of two versatile and efcient methods, namely the green and gamma radiolysis for Fe-Ag nanoparticles (NPs) synthesis, characterization, and further their growth inhibition potential on some spoilage microorganisms. Green Ag/Fe2O3 NPs were obtained at Fe-Ag [3:1], annealing temperature of 800 °C for 2 h, and gamma irradiated Ag/Fe3O4 NPs were obtained at Fe-Ag [7:1], a 50 kGy dose. The characterization techniques were performed with these two samples whereby the sizes from crystallographic and microscopic analyses were 39.59 and 20.00 nm for Ag/Fe2O3 NPs, 28.57 and 15.37 nm for Ag/Fe3O4 NPs, respectively. The polycrystallinity nature observed from X-ray diffraction was in accordance with the selected area electron difraction. The vibrational properties confrmed the presence of bimetallic Fe-Ag NPs with the depiction of chemical bonds, Fe–O and Ag–O from attenuated total refection-Fourier transform infrared spectroscopy and elements Ag, Fe, O from energy-dispersive X-ray spectroscopy analyses. The magnetic properties carried out using a vibrating sample magnetometer suggested a superparamagnetic behavior for the Ag/Fe2O3 NPs and a ferromagnetic behavior for the Ag/Fe3O4 NPs. Overall, the green Ag/Fe2O3 NPs successfully inhibited the growth of spoilage yeasts Candida guilliermondii, Zygosaccharomyces fermentati, Zygosaccharomyces forentinus, and spoilage molds Botrytis cinerea, Penicillium expansum, Alternaria alstroemeriae.
Influence of Synthesis Method on Structural, Morphological, Magnetic, and Antimicrobial Properties of Fe-Ag Nanoparticles
(Journal of Inorganic and Organometallic Polymers and Materials, 2023) Noukelag, Sandrine Kamdoum; Ngqoloda, Siphelo; Arendse, Christopher J; Mewa-Ngongang, Maxwell
This contribution reports on the development of two versatile and efficient methods, namely the green and gamma radiolysis for Fe-Ag nanoparticles (NPs) synthesis, characterization, and further their growth inhibition potential on some spoilage microorganisms. Green Ag/Fe2O3 NPs were obtained at Fe-Ag [3:1], annealing temperature of 800 °C for 2 h, and gamma irradiated Ag/Fe3O4 NPs were obtained at Fe-Ag [7:1], a 50 kGy dose. The characterization techniques were performed with these two samples whereby the sizes from crystallographic and microscopic analyses were 39.59 and 20.00 nm for Ag/Fe2O3 NPs, 28.57 and 15.37 nm for Ag/Fe3O4 NPs, respectively. The polycrystallinity nature observed from X-ray diffraction was in accordance with the selected area electron diffraction. The vibrational properties confirmed the presence of bimetallic Fe-Ag NPs with the depiction of chemical bonds, Fe–O and Ag–O from attenuated total reflection-Fourier transform infrared spectroscopy and elements Ag, Fe, O from energy-dispersive X-ray spectroscopy analyses. The magnetic properties carried out using a vibrating sample magnetometer suggested a superparamagnetic behavior for the Ag/Fe2O3 NPs and a ferromagnetic behavior for the Ag/Fe3O4 NPs. Overall, the green Ag/Fe2O3 NPs successfully inhibited the growth of spoilage yeasts Candida guilliermondii, Zygosaccharomyces fermentati, Zygosaccharomyces florentinus, and spoilage molds Botrytis cinerea, Penicillium expansum, Alternaria alstroemeriae.
Infuence of Synthesis Method on Structural, Morphological, Magnetic, and Antimicrobial Properties of Fe‑Ag Nanoparticles
(Springer, 2023) Noukelag, Sandrine Kamdoum; Ngqoloda, Siphelo; Mewa‑Ngongang, Maxwell; Kotsedi, Lebogang; Razanamahandry, Lovasoa Christine; Ntwamp, Seteno; Arendse, Christopher; Maaza, Malik
This contribution reports on the development of two versatile and efcient methods, namely the green and gamma radiolysis for Fe-Ag nanoparticles (NPs) synthesis, characterization, and further their growth inhibition potential on some spoilage microorganisms. Green Ag/Fe2O3 NPs were obtained at Fe-Ag [3:1], annealing temperature of 800 °C for 2 h, and gamma irradiated Ag/Fe3O4 NPs were obtained at Fe-Ag [7:1], a 50 kGy dose. The characterization techniques were performed with these two samples whereby the sizes from crystallographic and microscopic analyses were 39.59 and 20.00 nm for Ag/Fe2O3 NPs, 28.57 and 15.37 nm for Ag/Fe3O4 NPs, respectively. The polycrystallinity nature observed from X-ray diffraction was in accordance with the selected area electron difraction. The vibrational properties confrmed the presence of bimetallic Fe-Ag NPs with the depiction of chemical bonds, Fe–O and Ag–O from attenuated total refection-Fourier transform infrared spectroscopy and elements Ag, Fe, O from energy-dispersive X-ray spectroscopy analyses. The magnetic properties carried out using a vibrating sample magnetometer suggested a superparamagnetic behavior for the Ag/Fe2O3 NPs and a ferromagnetic behavior for the Ag/Fe3O4 NPs. Overall, the green Ag/Fe2O3 NPs successfully inhibited the growth of spoilage yeasts Candida guilliermondii, Zygosaccharomyces fermentati, Zygosaccharomyces forentinus, and spoilage molds Botrytis cinerea, Penicillium expansum, Alternaria alstroemeriae.
Spin coating immobilisation of C-N-TiO2 Co-Doped nano catalyst on glass and application for photocatalysis or as electron transporting layer for perovskite solar cells
(MDPI, 2020) Mouele, Emile Salomon Massima; Ngqoloda, Siphelo; Pescetelli, Sara
Producingactivethinﬁlmscoatedonsupportsresolvesmanyissuesofpowder-basedphoto catalysis and energy harvesting. In this study, thin ﬁlms of C-N-TiO2 were prepared by dynamic spin coating of C-N-TiO2 sol-gel on glass support. The eﬀect of spin speed and sol gel precursor to solvent volume ratio on the ﬁlm thickness was investigated. The C-N-TiO2-coated glass was annealed at 350◦C at a ramping rate of 10◦C/min with a holding time of 2 hours under a continuous ﬂow of dry N2. The C-N-TiO2 ﬁlms were characterised by proﬁlometry analysis, light microscopy (LM), and scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS). The outcomes of this study proved that a spin coating technique followed by an annealing process to stabilise the layer could be used for immobilisation of the photo catalyst on glass. The exposure of C-N-TiO2 ﬁlms to UV radiation induced photocatalytic decolouration of orange II (O.II) dye. The prepared C-N-TiO2 ﬁlms showed a reasonable power conversion eﬃciency average (PCE of 9%) with respect to the reference device (15%). The study oﬀers a feasible route for the engineering of C-N-TiO2 ﬁlms applicable to wastewater remediation processes and energy harvesting in solar cell technologies.
Vertically aligned silicon nanowires synthesised by metal assisted chemical etching for photovoltaic applications
(University of the Western Cape, 2015) Ngqoloda, Siphelo; Cummings, F.R.; Arendse, Christopher J.; Motaung, D.E.
One-dimensional silicon nanowires (SiNWs) are promising building blocks for solar cells as they provide a controlled, vectorial transport route for photo-generated charge carriers in the device as well as providing anti-reflection for incoming light. Two major approaches are followed to synthesise SiNWs, namely the bottom-up approach during vapour-liquid-solid mechanism which employs chemical vapour deposition techniques. The other method is the top-down approach via metal assisted chemical etching (MaCE). MaCE provides a simple, inexpensive and repeatable process that yields radially and vertically aligned SiNWs in which the structure is easily controlled by changing the etching time or chemical concentrations. During MaCE synthesis, a crystalline silicon (c-Si) substrate covered with metal nanoparticles (catalyst) is etched in a diluted hydrofluoric acid solution containing oxidising agents. Since the first report on SiNWs synthesised via MaCE, various publications have described the growth during the MaCE process. However lingering questions around the role of the catalyst during formation, dispersion and the eventual diameter of the nanowires remain. In addition, very little information pertaining to the changes in crystallinity and atomic bonding properties of the nanowires post synthesis is known. As such, this study investigates the evolution of vertical SiNWs from deposited silver nanoparticles by means of in-depth electron microscopy analyses. Changes in crystallinity during synthesis of the nanowires are probed using x-ray diffraction (XRD) and transmission electron microscopy (TEM). Deviations in the optical properties are quantified using optical reflectivity measurements by employing ultraviolet-visible (UV-Vis) spectroscopy, whereas the bonding configurations of the nanowires are probed by Raman and Fourier transforms infrared spectroscopy. Diameters of 50 – 200 nm vertical SiNWs were obtained from scanning electron micrographs and nanowires lengths linearly increased with etching time duration from about 130 nm after 30 seconds to over 15 μm after 80 minutes. No diameter modulations along nanowires axial direction and rough nanowires apexes were observed for nanowires obtained at longer etching times. These SiNWs remained crystalline as their bulk single crystalline Si wafers but had a thin amorphous layer on the surface, findings confirmed by TEM, XRD and Raman analysis. Nanowires were found to be partially passivated with oxygen with small traces of hydrogen termination, confirmed with infrared absorption studies. Finally, low optical reflection of less than 10% over visible range compared to an average of 30% for bulk Si were measured depicting an antireflective ability required in silicon solar cells.

Browsing by Author "Ngqoloda, Siphelo"

Results Per Page

Sort Options